Services — Gemstone Industrial Services

Comprehensive industrial solutions delivered with safety, precision and proven performance — every job, every time, across North America.

Abrasive Blasting

Surface prep that makes coatings last.

High-pressure abrasive media removes rust, old coatings, scale and contaminants from structural steel, pipelines, tanks and concrete. Up to 80% of premature coating failures trace back to poor surface preparation — we eliminate that risk with mobile wet/dry blasting and in-shop capability.

Mobile wet (dust-suppressing) and dry blasting systems
Media matched to the exact surface profile — steel grit to walnut shell
In-shop blasting for fabricated components
Reusable abrasives cut waste and environmental impact

Full abrasive blasting capabilities Cut sheet (PDF)

Coatings & Linings

The core trade — 25 years deep.

Epoxy, polyurethane, polyurea and vinyl ester systems that protect steel, concrete, equipment and piping against corrosion, abrasion, chemicals and UV. Tank and pipe linings engineered for critical service — potable water, chemical storage, wastewater.

Fusion Bonded Epoxy (FBE) for pipelines and reinforcement
Interior tank linings for product integrity
High-performance exterior systems for harsh exposure
AMPP QP1 & QP3 accredited application, field and shop

Full coatings & linings capabilities Cut sheet (PDF)

Concrete Repairs

Structural restoration with minimal downtime.

Cracking, spalling, scaling and joint failure in plants, warehouses and infrastructure — restored with epoxy crack injection, polymer-modified mortars and resurfacing that return structural integrity and safety.

Epoxy crack injection and structural patching
Polymer-modified mortars and resurfacing
Pile jacket installation for marine structures
Joint repair and protective sealing

Full concrete repairs capabilities Cut sheet (PDF)

Containment

SSPC Class-1A enclosures, engineered per project.

End-to-end containment for blasting, coatings and hazardous-materials work: Class-1A enclosures, negative-air systems with HEPA filtration and climate control — fully compliant with SSPC, OSHA and EPA standards.

SSPC Class-1A engineered enclosures
Negative-air pressure with HEPA filtration
Tarps, shrink-wrap, screens and sandblast curtains
Dehumidification and climate control

Full containment capabilities Cut sheet (PDF)

Demolition & Remediation

High-stakes D&R, nuclear to renewables.

Over 35 years of demolition and remediation leadership — DOE nuclear site decommissioning, catastrophic wind-turbine cleanups and large-scale contaminated soil remediation, executed where precision and safety are non-negotiable.

DOE / NRC-regulated and DoD facility experience
Selective structural demolition
Contaminated soil remediation
National Demolition Association member

Full demolition & remediation capabilities Cut sheet (PDF)

Equipment Rental

Hydra Platforms and the full blasting fleet.

Hydra Platform under-bridge access units, blasting pots, wet/dry systems, HEPA negative-air units, dust collectors and decon trailers — the specialized fleet behind our own field work, available for yours.

HP35 / HPT43 Hydra Platform bridge access units
Blasting pots and dustless / soda / media systems
HEPA negative-air units and decon trailers
Delivered, serviced and supported by our crews

Full equipment rental capabilities Cut sheet (PDF)

Fireproofing

Passive protection, cementitious and intumescent.

SFRM and IFRM systems that deliver up to 3 hours of thermal protection for structural steel, concrete, piping and equipment — engineered passive fire protection that meets code without sacrificing finish.

Cementitious (SFRM) spray-applied systems
Intumescent (IFRM) paint-like architectural finishes
Structural steel, piping and equipment
Code-compliant thickness verification

Full fireproofing capabilities Cut sheet (PDF)

Industrial Insulation

Hot, cold and cryogenic — jacketed or spray-applied.

Complete mechanical insulation for piping, tanks, vessels, boilers and equipment — finished with metal jacketing and lagging, plus removable covers, heat tracing and CUI programs. Where a jacketed system isn't the right fit, spray-applied ceramic and aerogel coatings (20–200 mils) keep surfaces below OSHA's 140°F touch threshold with nothing to trap moisture.

Mineral wool, fiberglass and calcium silicate systems
Aluminum, stainless and PVC jacketing, fabricated to fit
Removable blankets, heat tracing and winterization
Corrosion under insulation (CUI) inspection, repair and prevention
Spray-applied thermal coatings for personnel protection

Full industrial insulation capabilities Thermal Insulating Coating cut sheet (PDF)

Lead Abatement

AMPP QP2 certified. EPA, OSHA and TSCA compliant.

Safe, compliant removal, encapsulation and disposal of lead-based coatings on bridges, tanks, steel structures and facilities — serving DOTs, municipalities and industrial clients nationally for over 25 years.

AMPP QP2 certified hazardous paint removal
HEPA recovery, negative-air and lead-safe enclosures
EPA-certified inspection and risk assessment
Licensed hazardous waste disposal (RCRA / TSCA)

Full lead abatement capabilities Cut sheet (PDF)

Marine Preservation

Navy, Coast Guard and commercial shipyards.

Our new Marine Services division brings the same AMPP-accredited crews to hulls, freeboards, decks, tanks and voids — new construction and repair, non-skid deck coatings, UHP surface prep, Class-1A containment and engineered access for the Navy, the Coast Guard and commercial shipyards.

New construction and repair preservation
Hull, freeboard, deck, tank and void coatings
Non-skid deck coating systems
Lead ballast removal and installation

Full marine preservation capabilities 2026 Marine Line Card (PDF)

Mechanical Services

Repairs, installs and 24/7 emergency response.

Process piping, HVAC, boilers and pumps — installation, repair, precision alignment and preventative maintenance from certified technicians who keep critical systems online through turnarounds and urgent failures.

Process pipe fabrication and installation
Welding, rigging and millwright services
Preventative and predictive maintenance programs
24/7 emergency response

Full mechanical services capabilities Cut sheet (PDF)

Scaffolding

Engineered access for the hardest-to-reach work.

Tube & clamp, system, suspended and mobile scaffolds engineered for refineries, power plants, turnarounds and bridge rehabilitation — designed, erected, inspected and dismantled by OSHA 1926-qualified crews.

Engineered design with 3D modeling
Multi-span bridge platform systems
Rope access and specialty enclosure systems
Short and long-term rental options

Full scaffolding capabilities Cut sheet (PDF)

Waterproofing

Moisture protection from foundation to roof.

Fluid-applied membranes, sheet systems and elastomeric coatings that protect foundations, decks, parking structures and water tanks from moisture intrusion, hydrostatic pressure and structural damage.

Below-grade foundation waterproofing
Seamless drainage-integrated membranes
Elastomeric deck and roof coatings
Water tank interior and exterior systems

Full waterproofing capabilities Cut sheet (PDF)

New Division

Industrial-grade preservation for the Navy, the Coast Guard and commercial shipyards — new construction and repair, corrosion control, specification compliance, safe execution and predictable schedule performance.

Serving

U.S. Navy
U.S. Coast Guard
Commercial Shipyards

Explore Marine Services

2026 Marine Line Card (PDF)

Specialty Division

Gemstone's specialty division brings certified welders, AWS-aligned bolting programs and on-site machining to complex infrastructure, marine and industrial environments — the capabilities that turned a coatings contractor into a turnkey partner.

Specialty WeldingTechnical Bolting & Joint IntegrityField MachiningFabrication

Specialty Welding (PDF)Technical Bolting (PDF)Field Machining (PDF)

Planning maintenance, a turnaround, or a new build?

Request a Quote

Thirteen Trades. One Contract.

Marine Services.

Specialty Welding & Mechanical